It's connected but not charging, sometimes it goes green, sometimes red and sometimes no light on power supply cord. When I look closely on the connector two alternate dots of the four have dark shade marks around them that was not there before. could it be the power supply cord or is it the battery?
It there a way to fix it.. what is odd is that when it is plugged in it stays at the same percentage of battery charge, and sometimes it actually starts charging gets to around 80%+ and stops while other times just keeps the current charge. Any thoughts?
Battery Information:
Model Information:
Serial Number: D86240333AQDNMGAE
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 511
Hardware Revision: 000a
Cell Revision: 1150
Charge Information:
Charge Remaining (mAh): 2431
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 7945
Health Information:
Cycle Count: 182
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11280
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 58
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 58
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Current Power Source: Yes
DarkWakeBackgroundTasks: 1
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
DarkWakeBackgroundTasks: 1
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: No
0 comments:
Post a Comment